Skip to content
  • Platform

    ModulesTouchPathYour ERPPlatform overview

    Modules

    • Warehouse Management
    • Manufacturing Execution
    • Inventory Management
    • Cycle Counting
    • Asset Tracking

    Adapters

    • iServ Adapter
    • Shop Order Adapter
    See every ERP we connect to
  • Integrations

    TouchPath works inside the ERP you run. Find yours to see what runs on it.

    All integrations

    Infor

    • Infor ERP LX
    • BPCS
    • Infor M3
    • Infor System21

    Other ERPs

    • SAP logoSAP
    • Oracle
    • Microsoft Dynamics
  • Solutions

    PlantsWarehousesDistribution

    Software for warehouses and plants, connected to your ERP.

    All solutions

    By industry

    • Automotive
    • Consumer packaged goods
    • Distribution centers
    • Food and beverage
    • General manufacturing
    • Paper and packaging
    • Third-party logistics

    By use case

    • Labor management
    • Custom solutions
    Minutes to run a lot recall, down from hours Food manufacturer · TouchInventory Read the story
  • Customers
  • Resources

    Demo videos Short videos, one process eachNews and insights

    Learn

    Migrating ERPs? Guides for TouchPath sites changing ERP
    • What is a WMS?
    • What is cycle counting?
    • What is an MES?
    • What is backflushing?
  • Company

    Questions about a project? Call or write to the team.

    US +1 (336) 885-1373Contact us

    TouchPath

    • About TouchPath
    • Services
    • Partners
    • Support login
  • Support login
  • US +1 (336) 885-1373
Book a demo
Book a demo

iServ Adapter for Infor ERP LX / BPCS

The iServ Adapter posts data into Infor ERP LX and BPCS and runs natively on IBM i (iSeries, AS/400).

  • A set of RPG ILE programs that work with the existing ERP LX/BPCS posting programs, or interface directly with the ERP, for inventory, labor and order management transactions
  • Supports BPCS 4.05CD, 6.x and 8.x, and Infor LX through 8.4.2; certified to work with IBM i 7.6 (July 2026)
  • Exchanges messages as fixed format data over IBM i data queues or IBM MQ

Talk to us about your ERP LX environment See the 17 transactions

At a glance

ERP versions BPCS 4.05CD, 6.x and 8.x, and Infor LX through 8.4.2
Runs on IBM i (iSeries, AS/400), certified to work with IBM i 7.6 (July 2026)
Program type RPG ILE programs, native on IBM i
Message formats Fixed format
Transports IBM i data queues; IBM MQ (formerly WebSphere MQ)
Databases DB2 on IBM i
Modes Real time (synchronous) and batch (asynchronous)
Transactions 17 named BPCS/ERP LX transactions, mapped below; which are available depends on the release
Framework iEnabler (formerly Application Integration Enabler, AIE)

The 17 BPCS/ERP LX transactions the iServ Adapter posts

Each arrow is one transaction, drawn from the department that raises it to the department it posts into, between the vendor organization on the left and the customer organization on the right. Select any arrow, or any row in the table, to see the BPCS/ERP LX code it posts through and what it does. Which transactions are available depends on the release.

Hover, tap or use the arrow keys

Supported BPCS/ERP LX transactions posted by the iServ AdapterSwimlane map of 17 transactions across six departments, purchasing, QA, stockroom, production, shipping and finance, between a vendor organization on the left and a customer organization on the right. Each arrow is one transaction; the table below lists the same data as text.Vendor organizationCustomer organizationVendorshippingCustomerreceivingPurchasingQAStockroomProductionShippingFinancePO receipt to stock U PUR550PO receipt inspection to stock PPO receipt to inspection NDRP resupply order receipt HShop order receipt RPick confirm B ORD570Production issue JMiscellaneous issue SShop order single issue IShop order multiple issues MProduction reporting with backflushing SFC650 JIT600Location transfer, by warehouse, by container, or by order moving allocations TCycle count adjustment YAdjustment ABook to physical Z or IPH fileOpening balance OReturn material authorization (RMA) RM

Select a transaction to see where it posts, its BPCS/ERP LX code and what it does.

Transaction BPCS / ERP LX code or program What it posts
Receiving and purchasing
PO receipt to stock U PUR550 Receives purchased goods against a purchase order directly into stock.
PO receipt inspection to stock P Moves purchased goods from inspection into stock once they pass.
PO receipt to inspection N Receives purchased goods into an inspection location for QA.
DRP resupply order receipt H Receives a distribution resupply order transferred in from another facility.
Production
Shop order receipt R Reports finished goods from a shop order into stock.
Shipping
Pick confirm B ORD570 Confirms the quantities picked for a customer order ahead of shipment.
Production
Production issue J Issues components from stock to production.
Miscellaneous issue S Issues stock for a reason outside a shop order.
Shop order single issue I Issues one component to a shop order.
Shop order multiple issues M Issues several components to a shop order in one transaction.
Production reporting with backflushing SFC650 JIT600 Reports production and relieves component stock by the bill of material.
Inventory control
Location transfer, by warehouse, by container, or by order moving allocations T Moves stock by warehouse, by container, or by order, carrying allocations with it.
Cycle count adjustment Y Corrects on-hand quantity from a cycle count result.
Adjustment A Corrects on-hand quantity for a stated reason.
Book to physical Z or IPH file Replaces the book quantity with the physical count, by transaction or from an IPH file.
Opening balance O Loads an opening on-hand balance for an item at a location.
Returns
Return material authorization (RMA) RM Receives goods returned by a customer back into stock.

Transactions and codes are as drawn in the TouchPath iServ Adapter brochure. Whether a given transaction is in scope for your environment is confirmed during a site evaluation.

How the iServ Adapter posts to ERP LX/BPCS

TouchPath’s iServ Adapter posts data into the ERP LX/BPCS system and runs natively on the IBM i (iSeries, AS/400). It is built on the high-speed framework of TouchPath’s adapter technology, iEnabler, and bundles fast posting programs that use the existing ERP LX/BPCS capabilities.

The posting programs

The iServ Adapter consists of a series of RPG ILE programs that either work with the existing ERP LX/BPCS posting programs or interface directly with ERP LX/BPCS to provide information related to inventory, labor and order management activities. With its fixed-format messaging, it provides a fast interface to an ERP LX/BPCS environment.

iEnabler, the messaging framework

iEnabler is a message-oriented framework that sends and receives messages by a variety of methods, including IBM MQ queues and IBM i data queues, so the same adapter supports real-time posting from the floor and batch-based systems.

For data synchronization, iEnabler also generates the trigger messages that bring ERP changes into TouchPath. It works natively with IBM i and DB2.

Extend the ERP rather than replace it

The point of the adapter is to extend an ERP LX/BPCS investment rather than replace it. Compliance requirements, acquisitions, new process requirements and technologies such as RFID, web services and mobility all put pressure on a long-running ERP. Swapping it for similar functionality gains little and costs time and money; connecting the floor, the distribution center and other systems to the ERP you already run does not.

TouchPath has certified successive versions of ERP LX/BPCS over more than 25 years and used the adapter to integrate them with the shop floor, distribution centers and TouchPath’s warehouse, inventory and MES software.

Decades of fixes are built in. The adapter’s patch history covers real BPCS edge cases, including multi-facility costing, 4-digit PO lines, over-receipts, 3-way match, negative production and kit picking.

What BPCS and Infor ERP LX are

BPCS (Business Planning and Control System) is the manufacturing ERP for IBM midrange systems first sold by System Software Associates in the 1980s. Infor acquired its owner, SSA Global, in 2006 and continued the product as Infor ERP LX, now sold as Infor LX. Installations of BPCS 4.05CD, 6.x and 8.x still run in manufacturing companies, almost always on IBM i, alongside ERP LX.

A version of the adapter is built for each release, so a plant does not have to upgrade the ERP first. Infor’s own product documentation is at docs.infor.com.

A hand aims a barcode scanner at a carton on a warehouse shelf

Runs natively on

IBM i

The iServ Adapter in two case studies

Two manufacturers on BPCS/ERP LX used TouchInventory with the iServ Adapter to replace green-screen and paper entry with real-time posting.

Food and beverage · TouchInventory + iServ Adapter

Real-time inventory into BPCS across North America and Europe

One of the world’s largest non-alcoholic beverage companies was implementing BPCS and needed automated data collection to feed real-time inventory movements directly into it. Entering data on green screens was not an option. The iServ Adapter posts the inventory, purchasing, shop order receipt and customer picking transactions; the plant runs vehicle-mounted units, handheld scanners and bar code printers, with lot traceability and first-expiry picking.

“With this technology, we not only capture inventory in real time, but validate on the RF devices and track inventory movements as they occur by the plant and warehouse employees.”

Operations Manager

Read the case study

Consumer packaging · TouchInventory + iServ Adapter for BPCS

Allergen-safe labeling and live inventory, deployed in 90 days

A global consumer packaging specialist (37 countries, 15,000 employees) needed label verification to stop allergen mislabeling, and real-time inventory in place of paper and shift-end batch entry. The solution used TouchInventory, the iServ Adapter for BPCS (inventory and labor), TouchPath High Availability and Intermec devices. The whole project, from scope to training, took about 90 days.

0external allergen liability incidents since deployment
5%reduction in working capital, with two FTE fewer per warehouse
10%improvement in service levels

Read the case study

iServ Adapter for ERP LX/BPCS: common questions

  • Which versions of BPCS and ERP LX does the iServ Adapter support?

    The iServ Adapter supports BPCS 4.05CD, 6.x and 8.x, and Infor LX through 8.4.2, and it is certified to work with IBM i 7.6 (July 2026). Exact support for a given environment is confirmed during a site evaluation.

  • What is the difference between BPCS and Infor ERP LX?

    They are the same product line. BPCS was developed by System Software Associates for IBM midrange systems; after Infor acquired SSA Global in 2006 the product continued as Infor ERP LX, today Infor LX. Many manufacturers still run BPCS 6.x or 8.x, and a version of the iServ Adapter is built for each of those releases and for ERP LX.

  • Does the iServ Adapter require changes to ERP LX/BPCS programs?

    The adapter’s RPG ILE programs either work with the existing ERP LX/BPCS posting programs or interface directly with the ERP, so transactions post through the ERP’s own capabilities rather than through modified ERP source.

  • Does TouchPath support BPCS on the AS/400?

    Yes. The iServ Adapter runs natively on IBM i, the platform formerly named iSeries and AS/400, with DB2.

  • Is the integration real time or batch?

    Both. iEnabler supports synchronous and asynchronous messaging over IBM i data queues or IBM MQ, so the same adapter serves real-time posting from the floor and batch-based systems.

  • Which TouchPath products post to ERP LX/BPCS through the iServ Adapter?

    TouchInventory does, in both case studies above, posting inventory, labor, purchasing, shop order receipt and customer picking transactions. The Shop Order Adapter for ERP LX/BPCS creates a shop order, changes its priority and closes it. Further adapters cover purchase order and requisition creation, and allocating or deallocating stock to customer and shop orders, including container-controlled items.

More on ERP LX/BPCS integration

Integration

ERP LX / BPCS integration

How data moves between ERP LX/BPCS and TouchPath in both directions, and what your IT team sets up on the IBM i.

Read the integration page

Case study

Real-time inventory into BPCS

A food and beverage manufacturer set up automated data collection that feeds real-time inventory directly into BPCS.

Read the case study

Solution

Manufacturing inventory management

TouchInventory captures inventory movements on the floor and posts them to the ERP.

See TouchInventory

Run ERP LX or BPCS? Tell us about your environment.

Tell us your ERP version, platform and the transactions you need on the floor, and we will walk you through how it would work.

US +1 (336) 885-1373 · info@touchpath.com

This form needs JavaScript. Email info@touchpath.com and we will pick it up from there.

  • Home
  • About
  • Industries
  • Solutions
  • Services
  • Technology
  • News & Insights
  • Case Studies
  • Resources
  • Contact Us!
  • Support Login
Ready to Get Started?
  • Terms & Conditions
  • Privacy & Cookie Policy
  • Sitemap

Copyright © 2026 TransitionWorks LLC (dba TouchPath). All rights reserved.