FIFO vs FEFO: what is the difference?

Blog

At a glance

FIFO uses the oldest lot first; FEFO uses the lot that expires first, whenever it arrived.

Updated November 2026

Talk to us about stock allocationWatch the stock allocation demo

Pick list

Lot A

ReceivedMar 3

ExpiresSep 30

Pick first

Lot B

ReceivedMar 10

ExpiresJun 15

Pick first

Lot C

ReceivedMar 17

ExpiresAug 20

Pick first

Sorted by expiry date: Lot B goes first

Sorted by date received: Lot A goes first

Switch the rule to re-sort the same three lots.

FIFO

First in, first out

FIFO uses the oldest stock first, by the date each lot was received or made.

FEFO

First expired, first out

FEFO uses the stock with the earliest expiry date first, whenever it arrived.

Where they split

When every lot of an item has the same shelf life, the two rules pick the same lot. They split when a newer lot expires before an older one. Manufacturers with dated materials or products use FEFO for those items; for stock that does not expire, FIFO is usually enough.

FIFO and FEFO in simple terms

Both are stock rotation rules. They decide which lot of an item leaves the shelf next, for a customer order or for an issue to production.

FIFO

First in, first out

The lot that was received or produced earliest is allocated and picked first.

FEFO

First expired, first out

Also written first expiry or first expiration, first out. The lot with the earliest expiry, use-by or best-before date is allocated and picked first.

Lot

Some systems call it a batch

A quantity of one item made or received together. It shares one lot number and, for dated goods, one expiry date.

Stock allocation

Which lot, which location

Reserving specific stock, down to the lot and the location, for an order line before it is picked. The rotation rule decides which lot.

FIFO in accounting

FIFO is also the name of an inventory costing method. This page is about physical rotation, which lot leaves the shelf. How stock is valued in the accounts is a separate setting in your ERP and does not have to match.

What is the difference between FIFO and FEFO?

FIFO sorts lots by when they came in. FEFO sorts them by when they go out of date.

Shelf lives differ more often than you might expect: lots from two suppliers, two production runs, or material that sat at a supplier before it shipped can arrive in one order and expire in another. Under FIFO, a short-dated lot that arrived second waits behind an older lot with more life left, and can expire on the shelf.

The same three lots, two rules

Lot B arrived after Lot A but expires first. FIFO ships Lot A first; FEFO ships Lot B first.

EXP SEP 30

Lot A

ReceivedMar 3

ExpiresSep 30

FEFO picks first

EXP JUN 15

Lot B

ReceivedMar 10

ExpiresJun 15

EXP AUG 20

Lot C

ReceivedMar 17

ExpiresAug 20

FIFO

Earliest received first

FEFO

Earliest expiry first

Sorts lots by Date received or produced Expiry or best-before date
Data it needs A receipt or production date for each lot An expiry date for each lot, recorded at receipt or when the lot is made
Suits Stock that does not expire, or where every lot has the same shelf life Dated stock where lots can have different shelf lives
What goes wrong without it Old stock ages on the shelf until it is obsolete A short-dated lot expires behind a newer one and is written off

When should a manufacturer use FEFO?

Use FEFO for any item that carries an expiry, use-by or best-before date and whose lots can differ in shelf life. Typical cases:

Use FEFO for

  • Food and beverage

    Ingredients and finished goods with a dated shelf life.

  • Chemicals, coatings and adhesives

    Products with a shelf life counted from the date of manufacture.

  • Pharmaceutical, medical and personal care products

    Items sold and used by expiry date.

  • Raw materials issued to production

    An expired lot on the line can mean a rejected batch, so FEFO applies to issues to the line as well as to customer shipments.

  • Customers with shelf-life terms

    Some customers set a minimum remaining shelf life on what they receive, so fresher lots go to them and older lots go to customers who will take them.

No expiry date

FIFO is usually enough for

Stock that does not expire, such as metal parts and fasteners.

FIFO still keeps older stock from aging into obsolescence.

Many sites run both

FEFO for dated items and FIFO for the rest, set item by item.

Rotation rule, set item by item

Dated items

FEFO

Stock that does not expire

FIFO

What FEFO needs to work

FEFO is only as good as the expiry dates behind it. Four things have to be in place:

  1. Lot control

    Every receipt and every production run gets a lot number, and the expiry date stays with that lot from then on.

  2. Labels a scanner can read

    The lot number goes on the label, so a scan identifies the lot and nobody keys it in by hand.

  3. Allocation by expiry date

    The system that reserves stock for orders sorts lots by expiry, so the pick list already names the right lot.

  4. A lot check at the pick

    The picker scans the lot, and a scan of the wrong lot is stopped before it ships.

Then add rules for stock near or past its date

  • On holdA hold so expired lots cannot be allocated.
  • Expiring soonA regular list of lots that will expire soon, so they are used first or sold on.
  • Counted by lotCounting by lot keeps the dates in the record matching the shelf; see what is cycle counting.

Expiry watch

Lot D Expired

On hold

Lot B Jun 15

Expiring soon

Lot C Aug 20

Counted by lot

How stock allocation applies FIFO and FEFO

Stock allocation is where the rule meets an order. When an order line is released, the warehouse system looks at every lot and location holding free stock of the item, sorts them by the rule and reserves enough to fill the line. The picker is then sent to those locations for those lots.

FIFO or FEFO

decides which lot.

Other strategies

decide which location to take it from, for example filling the line with the fewest picks, or emptying part-full bins first to free space for receiving.

With FEFO the right lot is often not the nearest one, so the pick list should name it.

The TouchWMS Auto Allocation screen, from the stock allocation demoDemo videoSee stock allocation on screenWatch the demo →

A narrated walk-through of stock allocation in TouchWMS.

FEFO at a global beverage manufacturer

A supervisor in a hairnet and white coat watches a food production line
Global beverage manufacturer

BPCSTouchInventoryiServ AdapterFEFO picking

Among the business benefitsReduced inventory shrinkage due to obsolescence

With this technology, we not only capture inventory in real-time, but validate on the RF devices and track inventory movements as they occur by the plant and warehouse employees.

Operations Manager, global beverage manufacturer

A global beverage manufacturer that was implementing BPCS needed lot traceability and FEFO picking for customer shipments, to reduce obsolete inventory. TouchPath delivered a customized TouchInventory solution with the iServ Adapter, and customer picking ran first expiration, first out.

Read the beverage manufacturer’s case study

Want the right lot on every pick? Tell us how you allocate stock today.

Tell us which ERP you run and how lots and expiry dates are handled today, and we will walk you through how it would work.

US +1 (336) 885-1373 · info@touchpath.com

This form needs JavaScript. Email info@touchpath.com and we will pick it up from there.

Back to News